TS - Terminal Service em Linux (RDesktop)

Comando rdesktop no linux

Exemplos:

rdesktop -a 16 -r printer:Deskjet-F300-series 10.0.0.98:3389 -u juniorlima -p com01449 -g 1024x768  -r clipboard:CLIPBOARD -r disk:mydisk=/home/phdigitos/temp/rdesktop -5 -z

rdesktop -a 16 -r printer:Deskjet-F300-series -A -s "C:\seamlessrdpshell64.exe d:\pasta\programa.exe" -c "d:\pasta"  10.0.0.98:3389 -u juniorlima -p com01449 -g 1024x768 -r clipboard:CLIPBOARD -r disk:mydisk=/home/phdigitos/temp/rdesktop -5 -z 


manual:
    ...

  -a: connection colour depth

  -u: user name

  -p: password (- to prompt)

  -b: force bitmap updates

  -A: enable SeamlessRDP mode

  -s: shell run

  -c: working directory

  -f = full Screen

  -g: desktop geometry (WxH) 1024x768

  -z: enable rdp compression

  -5: use RDP version 5 (default)

   
  -r: enable specified device redirection (this flag can be repeated)
         '-r comport:COM1=/dev/ttyS0': enable serial redirection of /dev/ttyS0 to COM1
             or      COM1=/dev/ttyS0,COM2=/dev/ttyS1
         '-r disk:floppy=/mnt/floppy': enable redirection of /mnt/floppy to 'floppy' share
             or   'floppy=/mnt/floppy,cdrom=/mnt/cdrom'
         '-r clientname=': Set the client name displayed
             for redirected disks
         '-r lptport:LPT1=/dev/lp0': enable parallel redirection of /dev/lp0 to LPT1
             or      LPT1=/dev/lp0,LPT2=/dev/lp1
         '-r printer:mydeskjet': enable printer redirection
             or      mydeskjet="HP LaserJet IIIP" to enter server driver as well
         '-r sound:[local[:driver[:device]]|off|remote]': enable sound redirection
                     remote would leave sound on server
                     available drivers for 'local':
                     alsa: ALSA output driver, default device: default
         '-r clipboard:[off|PRIMARYCLIPBOARD|CLIPBOARD]': enable clipboard
                      redirection.
                      'PRIMARYCLIPBOARD' looks at both PRIMARY and CLIPBOARD
                      when sending data to server.
                      'CLIPBOARD' looks at only CLIPBOARD.
         '-r scard[:"Scard Name"="Alias Name[;Vendor Name]"[,...]]
          example: -r scard:"eToken PRO 00 00"="AKS ifdh 0"
                   "eToken PRO 00 00" -> Device in Linux/Unix enviroment
                   "AKS ifdh 0"       -> Device shown in Windows enviroment 
          example: -r scard:"eToken PRO 00 00"="AKS ifdh 0"
                   "eToken PRO 00 00" -> Device in Linux/Unix enviroment
                   "AKS ifdh 0"       -> Device shown in Windows enviroment 
          example: -r scard:"eToken PRO 00 00"="AKS ifdh 0;AKS"
                   "eToken PRO 00 00" -> Device in Linux/Unix enviroment
                   "AKS ifdh 0"       -> Device shown in Windows enviroment 
                   "AKS"              -> Device vendor name